Honeywell FBII OMNI 600 User Manual page 4

Quick Reference (cont)
The following table lists the "Quick Commands" available with this control.
Key
# 1 Quick Arm – if system is ready
Force Arm – bypasses faulted
# 2
zones
BYPASS Quick Bypass
nn (zone no.)
# 3 Set Time and Date
Zone Directory
# 4
# 50 Quick Help (OMNI624/848 only)
Show Time and Date
# 51
# 52 Show Auto Arm Time
# 53 User Event Log View
Set Auto Arm Time of Current
# 54
Partition (OMNI624/848) or
System (OMNI400/600)
# 55 Display Firmware Version
# 56 Display Key Fob Low Batteries
(OMNI624/848 only)
Door Strike
# 57
# 58 Change/View Pager Number
# 6 Display/Toggle Chime Mode
Assign User to Other Partition
# 7
or to Activate Paging
(OMNI624/848 only)
# 8 User Page Toggle
# 9 User On-line
Multi-Partition (OMNI624/848
# 0
only)
- 4 -
Description Keypads
All keypads
All keypads
All keypads
All keypads
LCD* only
LCD* only
LCD* only
LCD* only
LCD* only
All keypads
LCD* only
All keypads
All keypads
All keypads
All keypads
All keypads
All keypads
All keypads
All keypads
* 2-line alpha display
Comments
Allows you to arm the system without requiring your
user code. User code is always needed to disarm
the system.
Allows you to arm the system even if some zones
are faulted. These zones will be automatically
bypassed and will be unprotected.
If not enabled, requires user code with authority 1,
2, or 3.
May require user code.
Lists each zone with its descriptors. Mode
terminates after last enabled zone.
Provides a listing of all quick commands available in
the system.
May also require code.
May also require code.
Also needs user code with authority level 1 or 2.
By partition (OMNI624/848) or system
(OMNI400/600), may also require code.
Displays panel's revision.
Wireless Key Fob battery test.
Activate doorstrike or trigger. May require certain
user code.
For keypad partition (OMNI624/848) or system
(OMNI400/600), only LCD* shows phone number.
LCD* displays current state first, then offers to
toggle. All others just toggle the state.
Need user auth. of 1 or 2. Digit 4 (P) enables user
to page.
Paging must be enabled and turned on.
Toggles if users should send page for
Open/Close by partition (OMNI624/848) or by
system (OMNI400/600).
Connects to downloader while on line, disconnects
home phone.
LCD* displays current enables, 1, 2, 3 – P = 4
NOTE: An entry of 3 is available for the OMNI848
only