Honeywell FBII OMNI 600 User Manual page 12

Arming the System (cont)
TO ARM THE SYSTEM IN INSTANT MODE
In INSTANT mode, all alarm sensors, including doors that normally have a delay
to allow you to disarm the system, will report an alarm immediately if activated.
Check to make sure the system is READY/
/
INSTANT
When the system has been armed successfully, the ARM/
INSTANT/
LCD Keypad:
ON: INSTANT
TO ARM THE SYSTEM IN INSTANT MODE AND STAY INSIDE
In INSTANT STAY mode, the perimeter portion of your burglar alarm system is
armed, but the time delays are eliminated from your normal entry/exit door(s). All
interior protection is disarmed, so you are free to move around inside.
Check to make sure the system is READY/
/
INSTANT
/
STAY
When the system has been armed successfully, the ARM/
light, and the STAY/
LCD Keypad:
ON: STAY / INS
- 12 -
followed by your user code.
light are lit, and the following is displayed:
Fixed-Word Keypad:
INSTANT/
followed by your user code.
light are all lit, and the following is displayed:
Fixed-Word Keypad:
STAY/
INSTANT/
✔
. When it is ready, press:
LED Keypad:
ARM/ and INSTANT/
LED lit
✔
. When it is ready, press:
light, the INSTANT /
LED Keypad:
ARM/ , STAY/
INSTANT/
light and the
, and
LEDs lit