Honeywell HSVR-04 User Manual page 126

Web Client Operation
118
Parameter
HTTP Port
Max Connection
Remote
PPPOE
Host
Email
The email interface is shown in
Figure 6-34 The Email Setup Menu
Please refer to the following sheet for detailed information.
Function
Default value is 80.
Network user max amount. The value ranges from 0
to 10.
0 means there is no user can access current device.
Input the PPPoE user name and password you get
from the IPS (internet service provider) and enable
PPPoE function. Please save current setup and then
reboot the device to get the setup activated.
Device connects to the internet via PPPoE after
reboot. You can get the IP address in the WAN from
the IP address column.
Please note if you want to reboot the device please
make sure you have proper reboot authority and
there is no local login user in the current device.
Figure 6-33.