Honeywell HSVR-04 User Manual page 74

Understanding of Menu Operations and Controls
66
Advanced setup interface is shown in
the corresponding function and then double-click the current item to go to
the setup interface.
Figure 5-9 Advanced Settings
IP Filter
IP filter interface is shown in
list. The list supports a max of 64 IP addresses.
Note that after you enable this function, only the IP listed below can access
current DVR.
If you disable this function, all IP addresses can access the current DVR.
Figure 5-10 IP Filter Menu
PPPoE
PPPoE interface is shown in
Figure 5-9. Draw a circle to enable
Figure 5-10. You can add IP in the following
Figure 5-11.