Honeywell HSVR-04 User Manual page 143

Figure 6-48 The Abnormity Setup Menu
Please refer to the following chart for detailed information.
Parameter Function
Possible abnormal errors include: no disk, disk no space, disk
error, net error.
Event Type
You need to draw a circle to enable this function.
The corresponding alarm activation output channel when alarm
Alarm Out
occurs, There are three channels.
The alarm output can be delayed for the specified time after the
alarm stops. Then the system disables alarm and
Latch
corresponding activation output.
The value ranges from 10s to 300s.
If you enable this function, the system can send out an email to
Send email
notify the specified user.
The system can display alarm information in the local DVR
Show
screen.
message
Honeywell
135