Maytag MED / GD 9700S Technical Education page 34

9. Place the console assembly on a padded
work surface with the bracket side facing
up, as shown in step 10.
10. Remove the four hex-head screws from
the console bracket and remove the
bracket.
Console Bracket Screws
Console Bracket
11. Remove the selector knob.
12. Remove the touchpad subassembly from
the console by unsnapping the six catches.
Use your thumb or a screwdriver.
Touchpad Subassembly
Subpanel Catch
(1 of 6)
4-5
Console