Jet Care - Whirlpool 11-0086-11 Owner's Manual

JET CARE

We recommend that you clean your jets when you drain your
spa. However, if you do need to clean your jets in between this
can be accomplished with a full spa.
1) To remove the jet inserts
turn the jet counterclockwise
to the off position until it stops.
Continue to turn the jet past
the stop point to loosen it from
the spa. The insert will now pull
out.
2) Soak jet inserts in a mixture
of 1 part vinegar to two parts
warm water for 2-3 hours. Pe-
riodically rotate the spinner
nozzle to break up residue in
the jets.
3) Rinse the jet inserts under
warm water.
4) To reinstall the jets insert
jet into jet body and turn clock-
wise until fully seated then tug
to make sure it is seated prop-
erly. You can then continue to
turn clock-wise until it stops.
NOTE: A jet with stainless
steel escutcheons can be
slippery. You can use a soft
cloth or jar-opening pad to assist in removing and installing
the jet.
31