Filter Cycle Frequency; Setting Economy Mode; Setting Economy Start Time; Setting Economy End Time - Whirlpool 11-0086-11 Owner's Manual

Filter cycle frequency

Press Ok key a fourth time.
The display will show FFxx, with "xx"
representing the number of filter cycles
per day (up to 24 depending on selected
duration).
Use (+) or (-) key to change setting.

Setting Economy mode

The Economy mode allows you to lower
the temperature set point of the spa by 20
°F (11 °C) during a certain period of the
day.
Press Ok key a fourth time.
Use (+) key to enable the economy mode,
the display will show EP 1.
Use (-) key to disable economy mode, the
display will show EP 0.

Setting Economy start time

To program the Economy mode, you must
enter two parameters:the start time and its
end time.
Press Ok key a fifth time.
The display will show ESxx, with "xx"
representing the starting hour.
Use (+) or (-) key to change setting (01:00-
12:00 AM/PM).

Setting Economy end time

Press Ok key a sixth time.
The display will show EExx, with "xx"
representing the end time in hours.
Use (+) or (-) key to change setting. (01:00-
12:00 AM/PM).
When in Economy mode, the "Econ"
message is displayed.
28