Whirlpool 11-0086-11 Owner's Manual page 19

Electrical wiring 50 Hz
Case 1
The installation of electrical
circuit jumpers is needed
in certain input supply
configurations.
Use uncut jumper as supplied
in the case of an input supply
wiring, single-phase 1 x 230
VAC (32 A max).
Case 3
Please note that in a 3-phase
system 1 x 230 VAC (3 x 16A)
No jumper installation
is required.
14
Case 2
In the case of an input supply
wiring for a dual phase system
2 x 230 VAC (16 A max), you'll
need to cut off a portion of the
jumper piece.
Proceed as follows:
Use a pair of pliers to firmly
hold the upper half of the metal
jumper, then break off the
other half.
Important!
Safely dispose of the discarded
portion in accordance with the
local waste disposal legislation
in force.