Chemical Treatment Of Water - Whirlpool 11-0086-11 Owner's Manual

MAINTAINING YOUR SPA cont...

CHEMICAL TREATMENT OF WATER

Water from your tap is fine for showers, bathing and drinking. However,
in a contained recirculating system such as in a spa, water must be
treated with chemicals. The main purpose of chemical treatment is to
keep the water sanitary and to maintain a specific balance of the water.
Proper balance ensures that the water will not cause irritation to the us-
ers or harm the spa's components. Chemical treatment does have its
limitations. When water evaporates, chemical residues are left behind.
As the levels of the residues combine with other types of residue, such
as body oil and detergents, your water becomes increasingly difficult
to maintain. Because of this residual effect, at some point it becomes
easier and more cost-effective to drain, clean and refill your spa with
new water. We recommend that the water be changed at least every
six months. At this time you should also clean or replace your filters. If
your spa has a frequent and/or heavy bather load, it may be necessary
to drain and fill your spa more often. Refer to the section titled "Draining
your spa" for instructions (page 28).
WARNING:
Spa damage due to improper chemicals is not covered
under warranty.
36