Download  Print this page

KitchenAid KHPS 9010 Manual

Hide thumbs

Advertisement

KHPF 9010
KHPS 9010

Advertisement

Table of Contents
loading

  Summary of Contents for KitchenAid KHPS 9010

  • Page 1 KHPF 9010 KHPS 9010...
  • Page 3: Table Of Contents

    Product description and symbols Using the burners Practical advice on using the hob Positioning the pan supports and wok support Hood and cabinetry clearances (mm) Injector table Warnings and suggestions Safeguarding the environment Installation (Flush and Traditional fitting) Gas connection Electrical connection Fixing the hob to the work top.
  • Page 4: Product Description And Symbols

    Product description and symbols 1. Removable pan supports 2. 1 kWh auxiliary burner 3. 1.65 kWh semi-fast burner 4. 3 kWh fast burner 5. 1.65 kWh semi-fast burner 6. Professional wok burner 7. Auxiliary burner control knob 8. Semi-fast burner control knob 9.
  • Page 5: Practical Advice On Using The Hob

    Practical advice on using the hob Read the instructions to get the best out of your Important: hob. Do not rest or drag the pan supports upside down • Use pans with a similar diameter to the burner on the hob as this could scratch it. (see the table on this page).
  • Page 6: Hood And Cabinetry Clearances (Mm)

    Hood and cabinetry clearances (mm) If a hood is to be installed above the hob, refer to the hood installation instructions to ensure the correct height above the hob. Injector table Category II2H3+ Type of gas used Type of Injector Control Nominal Nominal...
  • Page 7: Warnings And Suggestions

    Warnings and suggestions To get the most out of your hob, please read Note: the instructions carefully and keep them for • Incorrect placement of the pan supports can future consultation. scratch the hob. To avoid this always ensure • These instructions are only valid in the countries that the rubber feet on the bottom of the pan whose destination symbol is shown on the serial supports are the only part of the pan supports...
  • Page 8: Safeguarding The Environment

    Safeguarding the environment Packing Note: The packing material is 100% recyclable and is • Incorrect placement of the pan supports can labelled with the recycling symbol . Please scratch the hob. To avoid this, always ensure dispose of all packing responsibly and carefully. that the rubber feet on the bottom of the pan supports are the only part of the pan supports Product...
  • Page 9: Installation (Flush And Traditional Fitting)

    - created in such a way that the openings both • This hob is designed to operate perfectly with inside and out cannot be obstructed, even by any oven in the KitchenAid range. The accident. Manufacturer declines all responsibility - Protected by plastic grill, and metallic netting should another make of oven be installed.
  • Page 10: Electrical Connection

    Electrical connection The electrical connections must comply with current legislation and be carried out by a qualified, competent person. • Information on the voltage and power absorbed are shown on the serial no. plate. Earth • The appliance must be earthed. (yellow/green) •...
  • Page 11: Fixing The Hob To The Work Top. Flush Fitted Model

    Fixing the hob to the work top. Flush fitted model Important: The following procedure must be carried out by competent technical personnel only. The hob can be installed on, or into different types of materials, such as masonry, metal, wood and heat resistant laminate coated wood (90°C).
  • Page 12: Adaption To A Different Type Of Gas Supply

    Adaption to a different type of gas supply If you are using a different kind of gas from the one requested from the Customer Care Centre on indicated on the serial no. plate and the orange 00800-3810-4026. label on the back of the hob, you must replace the •...
  • Page 13: Fitting The Wok Burner

    Fitting the wok burner To fit the double crown wok burner: Insert in the following order: 1. burner ring (A); 2. decorative covering ring (B); 3. external burner cap (C); 4. internal burner cap (D). Note: make sure that: 1. the locating pin for the burner ring (A) is inserted correctly in the slot on the burner unit.
  • Page 14: General Cleaning & Maintenance

    General cleaning & maintenance Always disconnect the hob from the electrical • Do not leave acidic or alkaline based products power supply and wait until it cools before cleaning like vinegar, mustard, salt, sugar or lemon juice and/or doing maintenance work. In order to keep lying on the hob, as this will damage the hob your hob in good condition, you must keep it and 'etch' the glass surface.
  • Page 15: Troubleshooting Guide

    Troubleshooting guide If the hob is not working properly, work through 3. the end part of the thermocouple is clean. this guide before contacting our Customer Care Centre. The pans are not stable? Check that: 1. the bottom of the pan is perfectly flat. The burner does not ignite, or the flame is 2.
  • Page 16 Printed in Italy 02/07 5019 719 01135...

This manual is also suitable for:

Khpf 9010