2. PRINTER SETUP
2.7.3 BASIC Expansion Mode
NOTE:
For the BASIC enable setting mode,
refer to the B-SA4T Series Key
Operation Specification stored in the
CD-ROM.
While "<5>EXPAND MDOE" is displayed on the LCD Message Display,
press the [PAUSE] key to enter the BASIC Expansion Mode.
In the BASIC Expansion Mode, it is possible to execute the BASIC
expansion mode program under the following conditions.
•
The BASIC expansion mode program has already been loaded.
•
The BASIC enable setting mode is selected.
The basic expansion mode ends when the basic expansion program is
exited.
When "<5>EXPAND MODE" appears, press the [PAUSE] key.
<5>EXPAND MODE
When the [PAUSE] key is pressed, BASIC program is executed.
E2-34
ENGLISH VERSION EO1-33047
2.7 Setting an Operating Environment