Download  Print this page

Advertisement

2. PRINTER SETUP
2.10 Position and Print
Tone Fine
Adjustment (Cont.)
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
Pressing the [FEED] key one time
causes a –1 step change, up to
–15 steps.
Pressing the [RESTART] key one
time causes a +1 step change, up to
+2 steps .
NOTES:
Choose a desired value by using the
[RESTART] or [FEED] key.
Pressing the [FEED] key one time
causes a –1 step change, up to
–15 steps.
Pressing the [RESTART] key one
time causes a +1 step change, up to
+10 steps .
Ribbon Motor Voltage Fine Adjustment
When the ribbon is slack or wrinkled and printing is affected, fine adjust
the ribbon motor torque by using the following procedure.
Take-up Motor (RBN ADJ <FW>)
[RESTART]
[FEED]
After selecting a fine adjustment value or to skip this menu, press the
[PAUSE] key.
Feed Motor (RBN ADJ <BK>)
[RESTART]
[FEED]
After selecting a fine adjustment value or to skip this menu, press the
[PAUSE] key.
E2-72
2.10 Position and Print Tone Fine Adjustment
<3>ADJUST SET
RBN ADJ<FW> -10
RBN ADJ<FW> +2
RBN ADJ<FW> +1
RBN ADJ<FW> +0
RBN ADJ<FW> -14
RBN ADJ<FW> -15
<3>ADJUST SET
RBN ADJ<BK> -5
RBN ADJ<BK> +10
RBN ADJ<BK> +9
RBN ADJ<BK> +8
RBN ADJ<BK> -14
RBN ADJ<BK> -15
ENGLISH VERSION EO1-33047
High
Motor Torque
Low
High
Motor Torque
Low

Advertisement

Table of Contents

This manual is also suitable for:

B-sa4tp series

Comments to this Manuals

Symbols: 0
Latest comments: