Avaya 4600 Series Installation Manual page 43

6. The software checks whether sufficient IP address information has been downloaded. In this
scenario, it is discovered that sufficient information has not been downloaded. The following
message is displayed while the DHCP process is invoked:
DHCP: 0 secs
* to program
The number of elapsed seconds is incremented once per second, until DHCP successfully
completes.
7. The following message is displayed while the TFTP process is invoked:
TFTP: ping 1
www.xxx.yyy.zzz
The number of pings is incremented once per second, until the TFTP server responds.
8. The following message is displayed while the upgrade script is downloaded from the TFTP
server:
46XXUPGRADE.SCR
n KB received
where n is the number of KBs that have been downloaded.
9. The script file is processed and the software determines that the name of the boot code file in
the telephone (BOOTNAME) is not the latest version. APPNAME is set to the name of an
application file that will replace the boot code. The following message is displayed while the
application file is downloaded into RAM:
app_filename
n KB received
where n is the number of KBs that have been downloaded.
10. The following message is displayed while the application file is stored in flash memory:
Saving to flash
n%, x secs
where n is the percentage of the file that has been stored, and x i s the number of seconds
that have elapsed. This will usually take longer than it took to download the file.
11. The following message is displayed while the phone is reset so that the application file can be
executed:
Restarting...
12. While the hardware is being initialized, the following message is displayed:
Initializing
Scenarios for the Restart Process
Appendix
A-3