Renault Trafic Handbook page 81

TRIP COMPUTER: general information
A
Trip computer and warning
system A
Depending on the vehicle, this includes
the following functions:
– distance travelled;
– journey parameters;
– information messages;
– operating fault messages (associ-
©
ated with the warning light);
– warning messages (associated with
®
the warning light) ;
– setting the time.
All these functions are described on the
following pages.
(1/2)
General reset and trip
mileage recorder reset key 1
Press and hold button 1 to reset the trip
mileage recorder. The display must be
set to "Trip mileage recorder".
Note: resetting is automatic when
the maximum capacity of any of the
memories is exceeded.
Selection key 1 on display A
Press button 1 to repeatedly to scroll
through the following information:
a) Total mileage and trip mileage re-
1
corder,
b) journey parameters:
– fuel consumed;
– average fuel consumption;
– current fuel consumption;
– estimated range;
– distance travelled;
– average speed;
c) mileage before service;
d) cruise control and speed limiter pro-
grammed speed;
e) trip log, operating faults and informa-
tion message readout.
Refer to the tables on the following
pages for display examples.
1.75