Renault Trafic Handbook page 169

TRANSPORTING OBJECTS
11
In the rear load area
Depending on the vehicle, rails 10, each
fitted with two rings 11, prevent trans-
ported objects from moving around.
The sole purpose of these rings is
to prevent transported objects from
moving. The objects must be se-
cured to the mounting rings on the
vehicle floor beforehand.
Always position the heaviest items directly on the floor. Use the lashing points on the floor of the load area, if these are
fitted to the vehicle. The luggage should be loaded in such a way that no items will be thrown forward and strike the
occupants if the driver has to brake suddenly. Fasten the rear seat belts, even if the seats are not occupied.
(3/3)
10
11
You can slide the rings onto the rail to
position them in the desired location.
To do this, pull out the button and slide
the ring at the same time. Release it so
that the button fits into one of the open-
ings on the rail which are specifically
designed to provide a secure mounting.
Special note for van version
Max. F: 625 daN
12
13
Depending on the length of the ob-
jects transported in the rear load area,
use centre flap 12 beneath rear bench
seat 13.
3.35