Renault Trafic Handbook page 165

REAR BENCH SEATS: functions
1
Functions of bench seats 1
and 2
(depending on the vehicle)
These are removed and refitted in the
same way.
Bench seat 1 can be fitted in the first or
last row.
Bench seat 2 can only be fitted in the
first row.
Note: in all cases, if the bench seat is
not equipped with catch 3, it is fixed.
Depending vehicle, it is not
permitted to swap bench
seats 1 and 2.
(1/2)
3
2
A
Removal
First, release the side seat belts by un-
locking them from their unit.
– On each side of the bench seat,
press on latch 3 then pull it forwards
(movements A and B);
– lift it (movement C);
For safety reasons, carry
out any adjustments when
the vehicle is not being
driven.
C
B
3
F
E
D
– move the bench seat towards the
rear of the vehicle to release the rear
anchorage (movement D);
– lift the bench seat (movement E);
– move the bench seat towards the
rear again (movement F) to release
the front anchorage points;
– remove the bench seat.
3.31