Renault Trafic Handbook page 200

CHANGING A WHEEL
Loosen the wheel nuts and remove the
central hubcap, then the wheel.
Fit the emergency spare wheel in place
on the central hub.
Position the central hubcap, tighten the
nuts and unscrew the jack.
With the wheels on the ground, tighten
the nuts as fully as possible and check
the tightness as soon as possible (tight-
ening torque 142 Nm).
Anti-theft bolt
If you use anti-theft bolts, fit these
nearest the valve (otherwise it may
not be possible to fit the wheel trim).
If you have a puncture, re-
place the wheel as soon as
possible.
A tyre which has been punc-
tured should always be inspected
(and repaired, where possible) by a
specialist.
5.10
(2/2)
If the vehicle is parked on
the hard shoulder, you must
warn other road users of
your vehicle's presence
with a warning triangle or with other
devices as per the legislation apply-
ing to the country you are in.