Tool Kit/Hubcap - Renault Trafic Handbook

TOOL KIT /HUBCAP
(2/2)
2
6
Jack assembly
Do not leave the tools un-
secured inside the vehicle
as they may come loose
under braking. After use,
check that all the tools are correctly
clipped into the tool kit, then position
it correctly in its housing: there is a
risk of injury.
If wheel bolts are supplied in the
tool kit, only use these bolts for the
emergency spare wheel: refer to the
label affixed to the emergency spare
wheel.
8
B
7
10
Remove the hubcap using hubcap
tool 10 (located in the tool kit) by en-
gaging the hook into one of the open-
ings around the edge of the hubcap.
To refit it, align it with valve 9.
Push the retaining hooks in fully, start-
ing with side A near the valve, followed
by B and C, finishing at D opposite the
valve.
A
9
C
D
Unclip this using hubcap tool 10 (lo-
cated in the tool kit).
10
10
5.3