Kenmore 79053 Service Manual page 39

14. Front Installation
install the front grille with the cabinet as follows:
• Hook upper tabs of front grille into slots on the
cabinet top. (See Figure 113)
• Push front grille's tips toward the cabinet in order
to snap side tabs into the cabinet. (See Figure
113)
• Open the filter door. (See Figure 114)
• Install the TYPE A screw (_ through the front
grille. (See Figure 114)
• Close filter door. (See Figure 115)
Figure 113
Front Installation
Screw®
IF AIR CONDITIONER IS BLOCKED BY STORM
WINDOW FRAME
Add wood to clear front as shown in Figure 116, or
remove storm window while air conditioner is
installed.
Figure 114 Front Installation
3.6 AIR CONDITIONER REMOVAL
Turn the air conditioner off, disconnect the power
cord, remove the window Ioking bracket and the
screws installed through the top and bottom of the
side curtain. Save all parts for later reinstallation.
Close the side curtain. Keeping a firm grip on the air
conditioner, raise the sash, and carefully tilt the air
conditioner backward, draining any condensed
water. Lift the air conditioner from the window.
Remove the sash seal from between the windows.
• Airconditioners covered in this manualpose an
excessiveweighthazard.Two or more people
are needed to moveand installthe unit.
To preventinjuryor strain,use properliftingand
carryingtechniqueswhen movingunit.
• When handlingthe air conditioner, becareful to
avoidcutsfromsharp metal fins on front and
rear coils.
• Make sure air conditioner does notfall during
removal.
Figure 115
Front Installation
ash
Woodblock 1 l/2"min
in areaof_ _(38r_)___L
leveling i]_t,r_
support _ Lt_p y " r_ 1
J_ I Board thicknessas
I _ required,along
Stormwindow frame entirestool.
or otherobstruction Fastenwithtwo
nailsor screws.
Figure 116
---39 m