Setting Up; Installation Mode - Panasonic PT-DZ13KU Operating Instructions Manual

Setting up

Installation mode

There are six ways to set up the projector. Set the [PROJECTOR SETUP] menu → [PROJECTION METHOD] (x page 108) depending
on the installation location. Set [COOLING CONDITION] (x page 109) to [AUTO]. Using the projector with [COOLING CONDITION] set
incorrectly may shorten the life of the lamp.
Mounting on the ceiling and projecting forward
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Mounting on the ceiling and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Portrait setting and projecting from the rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
*1 For the portrait setting, use the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD320P (1 pc), ET-LAD320PW (2 pcs)).
*2 Using the optional Replacement lamp unit (for portrait mode) (Model No.: ET-LAD320P (1 pc), ET-LAD320PW (2 pcs)) will set the cooling condition
to [PORTRAIT SETTING].
Note
f In the portrait setting, the on-screen menu is displayed sideways.
Chapter 2 Getting Started — Setting up
Method
[FRONT/CEILING]
[CEILING SETTING]
Method
[REAR/CEILING]
[CEILING SETTING]
*1
Method
[REAR/FLOOR]
[PORTRAIT SETTING]
*2
Setting on a desk/floor and projecting from rear
(Using the translucent screen)
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Setting on a desk/floor and projecting forward
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Portrait setting and projecting forward
Menu item
[PROJECTION METHOD]
[COOLING CONDITION]
Method
[REAR/FLOOR]
[FLOOR SETTING]
Method
[FRONT/FLOOR]
[FLOOR SETTING]
*1
Method
[FRONT/FLOOR]
[PORTRAIT SETTING]
*2
ENGLISH - 31