[Left/Right Swap]; [3D Color Matching]; [3D Picture Balance] - Panasonic PT-DZ13KU Operating Instructions Manual

Note
f When set to [AUTO], [SIMULTANEOUS], [SIDE BY SIDE], [TOP AND BOTTOM], [LINE BY LINE], or [FRAME SEQUENTIAL], 3D images
are not displayed in [3D SIMUL INPUT SETTING]. In [AUTO], however, this only occurs when 3D format can be recognized.
f This may not function properly for some connected external devices.

[LEFT/RIGHT SWAP]

Display images by inverting the timing of horizontal image switching. Change the settings when there is something wrong with the 3D image
being viewed.
1) Press as to select [LEFT/RIGHT SWAP].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[SWAPPED]
Note
f This is disabled when [3D SYSTEM SETTING] is set to other than [SINGLE].

[3D COLOR MATCHING]

Switches the color matching correction data applied to the displayed image.
1) Press as to select [3D COLOR MATCHING].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[SHARED 2D/3D]
[SEPARATE 2D/3D]
Note
f Switch the setting of [COLOR MATCHING] (x page 96) while inputting the signal to be adjusted.

[3D PICTURE BALANCE]

Correct a shift when the brightness or color differ in the right eye and left eye images.
1) Press as to select [3D PICTURE BALANCE].
2) Press the <ENTER> button.
f The [3D PICTURE BALANCE] screen is displayed.
3) Press as to select an item, and press qw to adjust the setting.
f Correct the setting value parts of the right eye image based on the left eye image.
f For [3D WAVEFORM MONITOR], the left eye and right eye images are divided and displayed in a waveform on the left and right.
[CONTRAST]
[WHITE BALANCE HIGH
RED]
[WHITE BALANCE HIGH
GREEN]
[WHITE BALANCE HIGH
BLUE]
[BRIGHTNESS]
[WHITE BALANCE LOW RED] Adjusts the low red white balance.
[WHITE BALANCE LOW
GREEN]
[WHITE BALANCE LOW
BLUE]
[COLOR]
[TINT]
[CLOCK PHASE]
Chapter 4 Settings — [3D SETTINGS] menu
Do not change the [NORMAL] setting if the 3D images are displayed correctly.
Select this when left and right 3D images are swapped to be displayed.
2D signals and 3D signals use the same correction data.
2D signals and 3D signals use different correction data.
Adjusts the contrast of the colors.
Adjusts the high red white balance.
Adjusts the high green white balance.
Adjusts the high blue white balance.
Adjusts the dark (black) part of the projected image.
Adjusts the low green white balance.
Adjusts the low blue white balance.
Adjusts the color saturation of the projected image.
Adjusts the skin tone in the projected image.
Adjusts when the screen flickers or outline blurs.
ENGLISH - 93