[Dvi-D In]; [Hdmi In]; [Sdi In] - Panasonic PT-DZ13KU Operating Instructions Manual

[DVI-D IN]

Switch the setting when the external device is connected to the <DVI-D IN> terminal of the projector and the image is not projected correctly.
1) Press as to select [DVI-D IN].
2) Press the <ENTER> button.
f The [DVI-D IN] screen is displayed.
3) Press as to select [EDID].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[EDID3]
[EDID1]
[EDID2:PC]
5) Press as to select [SIGNAL LEVEL].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[0-255:PC]
[16-235]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The data for Plug and play will change when the setting is changed. Refer to "List of compatible signals" (x page 175) for a resolution that
supports plug and play.

[HDMI IN]

Switch the setting when the external device is connected to the <HDMI IN> terminal of the projector and the image is not projected correctly.
1) Press as to select [HDMI IN].
2) Press the <ENTER> button.
f The [HDMI IN] screen is displayed.
3) Press qw to switch the [SIGNAL LEVEL] item.
f The items will switch each time you press the button.
[AUTO]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operating instructions of the
external device regarding the output of the external device.
f The HDMI signal level is displayed for every 30 bits of input.

[SDI IN]

(Only for PT-DZ13KU, PT-DS12KU, PT-DZ10KU)
Set to match the signal to input to the <SDI IN 1>/<SDI IN 2> terminals (PT-DZ13KU, PT-DS12KU) or <SDI IN> terminal (PT-DZ10KU).
100 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
Recognizes movie-based video signals and still image signals automatically.
Select mainly when an external device that outputs movie-based video signals (such as a blu-ray disc
player) is connected to the <DVI-D IN> terminal.
Select mainly when an external device that outputs still image signals (such as a computer) is
connected to the <DVI-D IN> terminal.
Automatically sets the signal level.
Select when an external device (such as a computer) is connected via the DVI-D terminal output.
Select when an external device (such as a blu-ray disc player) is connected via the HDMI terminal
output using a conversion cable, etc.
Automatically sets the signal level.
Select when the HDMI terminal of an external device (such as a blu-ray disc player) is connected to
the <HDMI IN> terminal.
Select when the DVI-D terminal output of an external device (such as a computer) is connected to the
<HDMI IN> terminal via a conversion cable or similar cable.
Select also when the HDMI terminal output of a computer or other device is connected to the <HDMI
IN> terminal.