[No Signal Shut-Off]; [Remote2 Mode] - Panasonic PT-DZ13KU Operating Instructions Manual

[REMOTE2 STATUS]
[AC VOLTAGE]
[COOLING CONDITION]
[SIGNAL INFORMATION]
*1 The lamp runtime to be displayed is real time. The following conversion is required to calculate the rough estimate for lamp replacement.
Model No.
PT-DZ13KU
PT-DS12KU
PT-DW11KU
PT-DZ10KU
Note
f The content of status can be sent via E-mail by pressing the <ENTER> button while displaying the status.
f Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
f If you attach a lamp unit used in a projector of a model different from the projector (PT-DZ13KU, PT-DS12KU, PT-DW11KU, PT-DZ10KU)
to the projector, or when the lamp unit used in the projector to a projector of a different model, the "lighting time" and "runtime" displayed in
[STATUS] may differ from the actual time.

[NO SIGNAL SHUT-OFF]

A function that automatically switches the power source of the projector to standby if there is no input signal for a certain period of time. The
time before switching to standby can be set.
1) Press as to select [NO SIGNAL SHUT-OFF].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DISABLE]
[10MIN.] - [90MIN.]

[REMOTE2 MODE]

You can set the <REMOTE 2 IN> terminal.
1) Press as to select [REMOTE2 MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[USER]
[L6500 SERIES]
120 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
Displays the control status of the REMOTE2.
Displays the status of the AC voltage.
Displays the set cooling conditions. When [AUTO] is set, automatically recognized result is displayed.
[MEMORY NO.]
[INPUT]
[SIGNAL NAME]
[SIGNAL FREQUENCY]
[SYNC.STATE]
[V.SYNC WIDTH]
[SCAN TYPE]
[TOTAL DOTS]
[DISPLAY DOTS]
[TOTAL LINES]
[DISPLAY LINES]
[SAMPLING]
[SIGNAL LEVEL]
[BIT DEPTH]
Formula for lamp replacement time (rough estimate)
(A x 56 + B x 40 + C x 35) ÷ 56
f A: Runtime when [LAMP POWER] is set to [HIGH]
f B: Runtime when [LAMP POWER] is set to [MIDDLE]
f C: Runtime when [LAMP POWER] is set to [ECO]
The formula when the optional Replacement lamp unit (for portrait mode) is used is:
A + B + C
(A x 40 + B x 35) ÷ 40
f A: Runtime when [LAMP POWER] is set to [NORMAL]
f B: Runtime when [LAMP POWER] is set to [ECO]
The formula when the optional Replacement lamp unit (for portrait mode) is used is:
A + B
Disables the No signal shut-off function.
Allows you to set in ten minutes intervals.
The pin assignment of the <REMOTE 2 IN> terminal is used by the factory default setting of the
projector.
Used to change the setting of the <REMOTE 2 IN> terminal.
The setting of <REMOTE 2 IN> terminal is used for the L6500 series compatibility.
Displays the memory number of the input signal.
Displays the input terminal currently selected.
Displays the input signal name.
Displays the frequency of the input signal.
Displays the synch polarity of the input signal.
Displays the vertical sync signal pulse width of the input signal.
Displays the scan type of the input signal.
Displays the total dot count of the input signal.
Displays the number of input signal display dots.
Displays the total line count of the input signal.
Displays the number of input signal display lines.
Displays the sampling information of the input signal.
Displays the signal level of the input signal.
Displays the gradation of the input signal.