Setting [SDI LINK]
(Only for PT-DZ13KU, PT-DS12KU)
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SDI LINK].
4)
Press qw to switch the item.
[SINGLE LINK]
[DUAL LINK]
Setting [SIGNAL LEVEL]
Select the amplitude of the signal to input.
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [SIGNAL LEVEL].
4)
Press qw to switch the item.
[64-940]
[4-1019]
Setting [BIT DEPTH]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [BIT DEPTH].
4)
Press qw to switch the item.
[AUTO]
[12-bit]
[10-bit]
Setting [3G-SDI MAPPING]
1)
Press as to select [SDI IN].
2)
Press the <ENTER> button.
f The [SDI IN] screen is displayed.
3)
Press as to select [3G-SDI MAPPING].
4)
Press qw to switch the item.
[AUTO]
[LEVEL A]
[LEVEL B]
Note
f Does not operate during SD-SDI or HD-SDI input.
Chapter 4 Settings — [DISPLAY OPTION] menu
Sets SDI1 input and SDI2 input to single link.
Sets SDI1 input and SDI2 input to dual link.
Normally use this setting.
Select when gray is displayed as black.
Automatically select 12 bits or 10 bits.
Fix to 12 bits.
Fix to 10 bits.
Automatically select level A or level B.
Fix to level A.
Fix to level B.
ENGLISH - 101