[Auto Signal]; [Auto Setup] - Panasonic PT-DZ13KU Operating Instructions Manual

3) Press qw to switch the [SCREEN FORMAT] item.
f The items will switch each time you press the button.
Model No.
PT-DZ13KU, PT-DZ10KU
PT-DS12KU
4) Press as to select [SCREEN POSITION].
f If [SCREEN FORMAT] is set to [16:10] in PT-DZ13KU and PT-DZ10KU, or [SCREEN FORMAT] is set to [4:3] in PT-DS12KU, then
selection and adjustment of [SCREEN POSITION] are not available.
5) Press qw to adjust [SCREEN POSITION].

[AUTO SIGNAL]

Set whether to execute automatic setup of signals automatically.
The screen display position or signal level can be adjusted automatically without pressing the <AUTO SETUP> button on the remote control
on each occasion if you input unregistered signals frequently at meetings, etc.
1) Press as to select [AUTO SIGNAL].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]

[AUTO SETUP]

Set this when adjusting a special signal or horizontally long (such as 16:9) signal.
Setting with [MODE]
1) Press as to select [AUTO SETUP].
2) Press the <ENTER> button.
f The [AUTO SETUP] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[DEFAULT]
[WIDE]
[USER]
f When [DEFAULT] or [WIDE] is selected, proceed to Step 7).
f When [USER] is selected, proceed to Step 5).
5) Press as to select [DISPLAY DOTS], and press qw to adjust [DISPLAY DOTS] to the horizontal
resolution of the signal source.
6) Press as to select [MODE].
7) Press the <ENTER> button.
f Automatic adjustment is executed. [PROGRESS] is displayed while automatically adjusting. When complete, the system returns to the
[AUTO SETUP] screen.
Adjusting position automatically
1) Press as to select [AUTO SETUP].
98 - ENGLISH
Chapter 4 Settings — [DISPLAY OPTION] menu
[SCREEN FORMAT]
[16:10]
[4:3]
[16:9]
[4:3]
[16:9]
Sets the auto signal function to off.
Executes automatic setup automatically when images are changed to unregistered signals during
projection.
Standard setting.
Select when an image aspect is a wide-screen signal, which does not meet the [DEFAULT] settings.
Select when receiving a signal with a special horizontal resolution (number of display dots).
Range when [SCREEN POSITION] is selected
Cannot be adjusted.
Adjusts the horizontal position between -160 and 160.
Adjusts the vertical position between -60 and 60.
Cannot be adjusted.
Adjusts the vertical position between -132 and 131.