Table 2-4. Redundant Power Supply Indicators
Indicator
Function
Power supply status Green indicates that the power supply is operational.
Power supply fault
Amber indicates a problem with the power supply.
AC line status
Green indicates that a valid AC source is connected to the power supply.
Hard-Drive Indicator Codes
Each hard-drive carrier has two indicators: a busy indicator and a status indicator (see Figure 2-6). The indicators provide information on the status of the
respective hard drive.
Figure 2-6. Hard-Drive Indicators
Table 2-5
lists the drive status indicator codes. Different codes display as drive events occur in the system. For example, in the event of a hard-drive failure,
the "drive fail" code appears. After the drive is selected for removal, the "preparing for removal" code appears. After the replacement drive is installed, the
"preparing for operation, drive online" code appears.
The drive-busy indicator signifies whether the hard drive is active on the SCSI bus. This indicator is controlled by the hard drive.
Table 2-5. Hard-Drive Status Indicator Codes
Drive-Status Indicator
Drive bay empty
Drive being prepared for operation, drive online
Drive being identified, prepared for removal, or drive offline Blinks green three times per second at equal intervals
Drive rebuilding
Drive failed
NIC Indicator Codes
The NIC on the back panel has an indicator that provides information on network activity and link status (see Figure 2-7).
codes.
Figure 2-7. NIC Indicators
Indicator Code
Off
Steady green
Blinks green once per second
Steady amber
Table 2-6
lists the NIC indicator