How To Play Cds; Selecting Preset Stations - Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 Owner's Manual

[ TRACK ] buttons

Selecting preset stations

A total of six stations may be selected (preset tuning) out of
those already set in memory through the main unit. (Refer to
"Manually setting stations into memory," page 33.)
1. Press the [
[ ] button: Tunes the next preset number at a higher frequency.
[ ] button: Tunes the next preset number at a lower frequency.

How to play CDs

Select the disc mode first.
Advancing to the next track or returning
to the beginning of the track being played
1. Press the [
[ ] button: Skips to the next track.
[ ] button: Returns to the beginning of the track being
• Hold the [
button to fast-reverse the track being played.
Skipping to the next disc or back to the
beginning of track being played.
1. Press the[
[ ] button: Advances the disc number to that of the
[ ] button: Returns the disc number to that of the lower
How to use an optional NOB remote control
BAND MODE
TRACK
TUNE SEEK
DISC
[
E-COM PWR
MUTE
ILLUMI
DISC ] button.
TRACK ] button.
played.
] button down to fast-forward, or the [
DISC ] button.
upper (next) disc.
DISC ] buttons
]
45