Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 Owner's Manual page 55

How to operate the receiver with an optional DSP/EQ unit connected
[AUDIO CONTROL] button
2. Tap button [AUDIO CONTROL] to select the desired
3. Turn the [AUDIO CONTROL] button.
4. Hold down a button, [1] to [6], for more than two
Buttons [1] to [6]
mode of adjustment.
The mode sequence on the button is as follows:
LR
LR
ER
ER
* The level and duration adjustments are available
in CONCERT and CATHEDRAL modes only.
This button adjusts the reverberation level and duration.
Right: Increases the value.
Left: Decreases the value.
seconds to preset a value.
The preset value is overwritten by the value set using
the above steps.
Direct (original sound)
Reverberation duration
High
Level
Time
Initial echo delay
•
Level Duration value
(Reverberation level)*
dB
(Reverberation duration)*
S
(Initial echo level)
dB
(Initial echo delay)
mS
Initial echo]
Reverberation
Long
55