How To Play The Tuner - Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 Owner's Manual

How to use the Card remote control

How to play the tuner

Enter the tuner mode first.
Select the FM/AM band
1. Tap the [BAND] button.
Select a station (manually or automatically)
A short tap of the button will allow manual station tuning.
Pressing for more than one second will start automatic
tuning.
1. Press the [
Selecting preset stations
A total of six stations may be selected (preset tuning) out of
those already set in memory through the main unit. (Refer to
"Manually setting stations into memory," page 33.)
1. Press the [
40
Each tap will switch tuner modes from FM1
FM3 AM.
TUNE• SEEK
[ ] button: Tunes to higher frequency stations.
[ ] button: Tunes to lower frequency stations.
PRESET CH
[ ] button: Selects the next higher number preset button.
[ ] button: Selects the next lower number preset button.
[ BAND ] button
[ ] buttons
TUNE SEEK
[ ] buttons
PRESET CH
] button.
] button.
FM2