Esn (Key Cd) Security Operating Procedure; How To Program The Key Cd - Eclipse ESN E3 High-Power CD Receiver with CDC/E-COM/DSP Control and Wireless Remote Model: 54420 Owner's Manual

[FM AM] button
ESN (Key CD) security operating
procedure

How to program the Key CD

1 .
Turn the vehicle's ignition on. Press the [PWR]
button or [FM• AM] button to activate the tuner
mode.
The tuner is now turned on.
2 .
Press and hold button [1], then the [FM• AM]
button, and hold both for more than one
second.
A [SEC] message appears, then in two seconds it will
change to [DISC].
The 54420 is now ready to accept your Key CD in the
CD slot.
3 .
Insert the CD into the slot.
A [SEC] message appears, the Key CD is ejected, then
the tuner mode is activated.

ESN (Key CD) security operating procedure

Button [1]
[PWR] button
13