Table of Contents
Advertisement
[FM AM] button
• Press any numbered button to select the station whose
frequency is indicated right above the button.
• When a new station is set in memory, the station previously
set in memory will be deleted.
• If the number of receivable stations fewer than six, the
stations set in the rest of the preset buttons will be retained.
Manually setting stations into memory
This section covers the setting of stations in memory under
the numbered buttons.
1 .
Press the [FM• AM] button to switch between
FM and AM.
2 .
Use the [
be entered in memory.
3 .
Select any button, from [1] to [6], and press it
for more than two seconds.
The tuned station is now memorized and set in the
button selected. Repeat the procedure to set additional
manually tuned stations in memory, in turn, for buttons
[1] to [6]. These buttons are called the preset buttons.
Caution
• If the vehicle's battery is disconnected (for repairs to the
vehicle or for removing the receiver), all stations in memory
will be lost. In such a case, set stations in memory again.
How to operate the tuner
Buttons [1] to [6]
] button to tune to the station to
[
] buttons
33
Advertisement
Table of Contents
