Replication Incompatible Versions
Description
Cause
Workaround
Replication Internal Error
Description
Workaround
Replication Jumbo Frames Blocked
Description
Cause
Workaround
Replication Destination Does Not Have Enough Space
Description
Cause
Workaround
172
Troubleshooting
Replication between the NAS source volume and the NAS destination
volume fails because the system version of the source NAS cluster is
higher than the system version of the destination cluster.
Replication task fails since the system version of the NAS source
volume is higher than the system version of the destination cluster.
Administrators should upgrade the system version of the destination
cluster to match the system version of the source cluster.
Replication between the source and the destination NAS volumes
fails due to an internal error.
Contact Dell to resolve this issue.
Replication between the NAS source volume and NAS destination
volume fails because the jumbo frames are blocked over the network.
Replication task fails because jumbo frames are blocked over
the network.
The administrator should verify that the network configuration
between the source cluster and the destination cluster has enabled
transferring jumbo frames across the switches or routers.
Replication between NAS source volume and NAS destination
volume fails because there is not enough space in the destination
NAS volume.
Replication task fails because there is not enough space in the
destination NAS volume.
Increase the space of the destination NAS volume.