Dell PowerVault NX3500 Administrator's Manual page 60

NOTE:
be configured on each port of the MD controllers. For MD device such as the
MD3200i with four ethernet ports per controller, the NAS cluster establishes
iSCSI connections on two of the ports. The other two ports can be used to
provision block storage to other iSCSI clients.
The Configuration Summary window is displayed.
All settings are applied to your controllers after this point. Listed below is a
checklist of items to review:
• Ensure no duplicate IP addresses are present
• Check that IP groups are in the same subnet as required
• NAS cluster name follows expected naming convention
• SAN MTU setting matches MTU configuration of the switch
connecting the NAS controllers to the backend MD3xx0i storage
device
12 Click Next on the Configuration Summary window.
60
Setting Up Your PowerVault NX3500 Solution
The MD storage array best practices recommend different subnets to