Changing NDMP Password
User name and password are required when configuring an NDMP server in
the DMA. The username is backup_user and cannot be changed.
To change the NDMP password:
1 Click Data ProtectionNDMPNDMP Configuration.
2 Click Change Backup User Password.
3 Enter admin password and the new password for backup_user.
4 Click Save Changes.
Modifying DMA Servers List
In order to take an NDMP backup of the PowerVault NX3500 NAS system, the
Backup Application server must be included in the whitelist of the DMA servers.
To add a DMA server to the list:
1 Click Data ProtectionNDMPNDMP Configuration.
2 Type the IP address of the DMA server in the empty DMA Server field.
DNS names are not supported.
3 Click Save Changes.
4 If no empty fields are available, click Add DMA Server button on the
Action tab and go to step 2.
To remove a DMA server from the list:
1 Click Data ProtectionNDMPNDMP Configuration.
2 Select the check box next to the DMA server you would like to remove.
3 Click Remove DMA Server on the Action bar.
NOTE:
Removing the DMA server from the whitelist does not interrupt backup-
restore operation already in progress to/from that DMA server.
Protecting Data on PowerVault NX3500
117