Getting System Component Versions; Getting Component Version: Witness Bios; Getting Component Version: Witness Manager (Mcu); Getting Component Version: Witness I210 Nic - Dell PowerEdge XR4000w Installation And Service Manual

Table of Contents

Advertisement

Getting system component versions

About this task
Most system component versions are easily accessible through examples given in

Getting component version: Witness BIOS

About this task
The Witness BIOS version can be found through:
● iDRAC
1. GUI
2. Redfish
3. RACADM
4. CPLD
● Witness ESXi OS interface

Getting component version: Witness manager (MCU)

About this task
The Witness MCU version can be found through:
● iDRAC
1. GUI
2. Redfish
3. RACADM
4. CPLD
● Chassis manager serial connection

Getting component version: Witness i210 NIC

About this task
The Witness i210 NIC FW can only be found through potential host interfaces or vendor tools run on the host. Please see
Updating Witness i210: Witness host

Getting component version: Witness M.2 FW

About this task
The Witness M.2 card firmware versions can be found through the Witness host through standard operations. Documentation
for the specific Witness host should be located online.
Example provided for ESXi shell only:
Figure 30. ESXi M.2 card firmware version
36
Initial system setup and configuration
for some information pertaining to vendor tools.
User interfaces: iDRAC.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents