Dell PowerVault NX3500 Administrator's Manual page 50

Table 2-2. Creating Virtual Disks
Item
Number of VDs or
LUNs
LUN sizes
NOTE:
LUN pairs
should be of the same
size.
Host group
To create virtual disks from free capacity:
1 Start the Create Virtual Disk Wizard.
2 On the Logical tab, select Free Capacity from the disk group you created
in the earlier steps.
3 Select Virtual Disk and then click Create.
The Introduction (Create Virtual Disk) window is displayed.
4 Click Next.
The Specify Capacity/Name window is displayed.
5 Select the appropriate unit for storage capacity in Units and enter the
capacity of the virtual disk in New Virtual Disk Capacity.
6 Enter a name for the virtual disk in Virtual Disk Name (for example,
NX3500Lun0).
50
Setting Up Your PowerVault NX3500 Solution
Supported
2, 4, 6, 8, 10, 12, 14, 16
125 GB, up to 15 TB
VD1: 125
Pair 1
GB
VD2: 125
GB
VD3: 759
Pair 2
GB
VD4: 759
GB
VD5: 1.33
Pair 3
TB
VD6: 1.33
TB
Single host group
Not supported
1, 3, 5, 7, 9, 11, 13, 15
Up to 125 GB, greater than 15 TB
VD1:125 GB
VD2: 130 GB
VD3: 759 GB
VD4: 650 GB
VD5: 1.33 TB
VD6: 1.90 TB
Multiple host group
Pair 1
Pair 2
Pair 3