Launching The Powervault Nascu - Dell PowerVault NX3500 Administrator's Manual

4 Open StartHere.htm.
5 Follow the prompts in the installer to complete the installation.
For Linux-based admin stations:
Graphical Installation
1 Insert the PowerVault NX3500 Resource Media into the optical drive.
2 Point the file-system explorer to the mounted optical drive.
3 Run StartHere.htm.
This launches an internet browser.
4 Follow the prompts in the installer to complete the installation.
Command-Line Installation
1 Insert the PowerVault NX3500 Resource Media into the optical drive.
2 Open a terminal window and change directories (cd) to the optical drive
(For example, cd /media/disk/media/cdrom).
3 Change directories to the InstData folder.
4 Identify the build of operating system being used (32-bit or 64-bit) and
change directory into either the Linux_amd64/VM/ (64-bit) or
Linux_i386/VM/ (32-bit) folder.
5 Run the installer located in this folder by calling sh ./pv-nas-config-utility-
installer-linux-<build_type>.bin.
6 Follow the steps in the installer to complete the installation.

Launching the PowerVault NASCU

For Windows-based operating systems:
1 Access the Windows desktop and double-click the PowerVault NX3500
Configuration Utility icon, or access the Windows start menu and
navigate to All ProgramsDellPowerVault NAS.
2 Click on PowerVault NX3500 Configuration Utility.
For Linux-based operating systems:
1 Execute the PowerVault NASCU from a terminal prompt.
2 Ensure that the currently logged-on terminal user is root.
54
Setting Up Your PowerVault NX3500 Solution