Removing The Coin-Cell Battery; Replacing The Coin-Cell Battery - Dell Studio 1450 Service Manual

Back to Contents Page
Coin-Cell Battery
Removing the Coin-Cell Battery
Replacing the Coin-Cell Battery
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
CAUTION: To help prevent damage to the system board, remove the main battery (see
computer.
CAUTION: Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
Removing the Coin-Cell Battery
1. Follow the procedures in Before You
2. Remove the system board (see
3. Turn the system board over.
4. Use a plastic scribe to push the coin-cell battery upward to release it from the slot.
1 system board
3 plastic scribe
Replacing the Coin-Cell Battery
1. Follow the procedures in Before You
2. Replace the coin-cell battery with the positive (+) side facing upwards.
3. Replace the system board (see
Back to Contents Page
Begin.
Removing the System Board).
2 coin-cell battery
Begin.
Replacing the System Board).
Removing the Battery) before working inside the