Dell Studio 1450 Service Manual page 47

1 WWAN module
Replacing the WWAN Module
1. Connect the WWAN module cable to the connectors on the WWAN module and the system board.
2. Place the WWAN module on the computer base.
3. Replace the three screws that secure the WWAN module to the computer base.
4. Replace the optical drive (see
5. Replace the speaker module (see
6. Replace the palm rest (see
7. Replace the keyboard (see
8. Replace the hard drive (see
9. Replace the Mini-Cards, if applicable (see
10. Replace the memory modules (see
11. Replace the base cover (see
12. Replace the battery (see Replacing the
Back to Contents Page
2 WWAN module cable connector
Replacing the Optical Drive).
Replacing the Speaker Module).
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Hard Drive).
Replacing the Mini-Card).
Replacing the Memory Module(s)).
Replacing the Base Cover).
Battery).