Replacing The Optical Drive - Dell Studio 1450 Service Manual

1 screw
11. Lift the optical drive away from the computer base.
Replacing the Optical Drive
1. Follow the procedures in Before You
2. Place the optical drive on the computer base.
3. Replace the screw that secures the optical drive to the system board.
4. Replace the palm rest (see
5. Replace the keyboard (see
6. Turn the computer over and replace the screw that secures the optical drive to the computer base.
7. Replace the memory modules (see
8. Replace the hard drive (see
9. Replace the Mini-Cards, if applicable (see
10. Replace the base cover (see
11. Replace the battery (see Replacing the
Back to Contents Page
2 optical drive
Begin.
Replacing the Palm Rest).
Replacing the Keyboard).
Replacing the Memory Module(s)).
Replacing the Hard Drive).
Replacing the Mini-Card).
Replacing the Base Cover).
Battery).