Bluetooth Board; Removing The Bluetooth Board; Replacing The Bluetooth Board - Dell Studio 1450 Service Manual

4. Replace the display bezel (see
5. Replace the display assembly (see
6. Replace the WWAN module (see
7. Replace the system board (see
Bluetooth Board

Removing the Bluetooth Board

1. Follow the procedures in Before You
2. Remove the bluetooth card (see
3. Disconnect the bluetooth board cable from the bluetooth board cable connector.
4. Using the pull-tab, lift and slide the bluetooth board away from the display cover.
1 pull-tab 2 bluetooth board cable connector
3 tabs (2)

Replacing the Bluetooth Board

1. Slide the bluetooth board until it is firmly seated under the tabs.
2. Connect the bluetooth board cable to the connector on the bluetooth board.
3. Replace the bluetooth card (see
Back to Contents Page
Replacing the Display Bezel).
Replacing the Display Assembly).
Replacing the WWAN Module).
Replacing the System Board).
Begin.
Removing the Bluetooth Card).
Replacing the Bluetooth Card).