Display Bezel; Replacing The Display Assembly; Removing The Display Bezel - Dell Studio 1450 Service Manual

1 screws (4)
6. Make note of the cable routing and carefully dislodge the cables from their routing guides.
7. Lift the display assembly away from the computer base.

Replacing the Display Assembly

1. Follow the instructions in Before You
2. Place the display assembly in position and replace the four screws (two on each side) that secure the display assembly to the computer base.
3. Route the cables through the routing guides.
4. Replace the WWAN module (see
5. Replace the system board (see
Display Bezel

Removing the Display Bezel

Begin.
Replacing the WWAN Module).
Replacing the System Board).