Replacing The Keyboard - Dell Studio 1450 Service Manual

Hide thumbs Also See for Studio 1450:
Table of Contents

Advertisement

6. Lift the keyboard surround off the computer.
 
CAUTION:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
 
7. Remove the screw at the top of the keyboard.
 
CAUTION:
Be extremely careful when removing and handling the keyboard. Failure to do so could result in damaging the keyboard cable.
 
8. Carefully slide the keyboard away from the computer as shown in the following illustration.
 
9. Push the keyboard connector tabs to release the keyboard cable.
 
10. Disconnect the keyboard cable from the keyboard connector.
1
screw
3
keyboard cable connector tabs (2)
5
keyboard cable
7
keyboard tabs (5)
 
11. Lift the keyboard off the computer.
 Replacing the Keyboard
 
1. Follow the instructions in
Before You
 
2. Slide the keyboard cable into the keyboard cable connector and push the tabs to secure the keyboard cable.
 
3. Align the tabs along the bottom of the keyboard with the slots on the palm rest.
 
4. Slide the keyboard tabs under the palm rest.
 
CAUTION:
The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when removing and handling the
keyboard.
 
5. Replace the screw at the top of the keyboard.
 
6. Align the keyboard surround with the palm rest and snap it into place.
 
7. Replace the three screws in the battery bay.
 
8. Replace the battery (see
Replacing the
2
keyboard
4
keyboard cable connector
6
palm rest slots (5)
 
 
Begin.
Battery).

Advertisement

Table of Contents
loading

This manual is also suitable for:

Studio 1457Studio 1458

Table of Contents