Lanier LW110 Operating Instructions Manual page 68

Maintaining Your Copier
If applicable, adjust the roll paper position and lock the lever.
You may hardly to adjust the roll paper position when you set 914mm ("36
). In this case, take out the paper holder, and then release the lock lever. Af-
ter you adjust it, put it back to the roll feeder.
4
Do not force to remove the paper holder when you need to change the pa-
per size. For how to remove and set the paper holder, see
The Roll Paper Size"
F
Rotate the paper roll slowly until the flap is almost fed into the rubber part
of the roller (A A A A ). While feeding the flap of the paper roll into the rubber
part of the roller, turn the paper knob clockwise (B B B B ).
56
P.52 "Changing