Lanier LW110 Operating Instructions Manual page 32

Copying
If you set the number of copies, Semi Synchro Cut can handle automatically
by the length at your setting for first copy.
Do not use carrier sheet and rear table when you use Semi synchro cutting. A
fault might occur.
A
Press the { { { { Cut Select} } } } key(1).
2
The Semi Synchro indicator lights up(2).
B
Choose any copy settings you require.
C
Make sure that the Wait indicator goes off and Ready and the Set Paper in-
dicator go on.
D
Press the { { { { RF Select/Cut} } } } key to turn on the RF Select indicator.
20