Lanier LW110 Operating Instructions Manual page 16

{ { { { Function Select} } } } key
11.
Press to change which setting you are ed-
iting. The current selection is shown by
the indicators above the key:
• Paper Length
• Leading Edge
• Copy Counter
Also used for copying a selected portion
of the original.
{ { { { +} } } } and { { { { —} } } } key
12.
Press to increase the value being edited.
Press to decrease the value being edited.
13.
Leading Edge/Copy Counter in-
dicator
Displays the margin settings and the
number of copies made.
14.
Roll Feeder indicator
Light up when you select Roll Feeder 1 or
2.
{ { { { RF Select/Cut} } } } key
15.
Use to select the paper feed type (when
the Roll Feeder option is installed). Also
press to stop a copy job.
{ { { { Copy Media} } } } key
16.
Press to select the type of copy paper you
are using.
The copier will apply more or less heat
accordingly.
• The top indicator-Translucent paper
indicator
• The bottom indicator-Film indicator
{ { { { Emergency Stop} } } } key
17.
Press to stop the copying process imme-
diately.
Use if your original is getting stuck in the
copier.
If you stop operation by pressing this
key, remove both the original and paper.
Density indicator and { { { { i
18.
j } } } } keys
j j
{j
Shows the density level the copies will
have.
Press the left key to make copies lighter.
Press the right key to make copies darker.
4
{ { { { Paper Feed} } } } key
19.
Press to feed the paper.
Paper Feed indicator(LED) lights up
when the machine is ready to feed roll
paper.
{ { { { Clear/Stop} } } } key
20.
When entering numbers, press to cancel.
While copying, press to stop copying.
i } } } } ,
i i