Power Connection - Lanier LW110 Operating Instructions Manual

Troubleshooting
• Altitudes of over 6500 feet (2000 m)
• Areas prone to strong vibrations
• Locations directly exposed to cool air from an air conditioner or heat from a
nearby heater (Sudden temperature changes may lead to condensation with-
in the copier.)
• Locations near a diazo copy machine

Power connection

R WARNING:
• Only connect the machine to the power source described on
R WARNING:
• Avoid multi-wiring.
5
• Do not damage, break or make any modifications to the pow-
• Do not plug or unplug the power cord with your hands wet.
R WARNING:
• Make sure the wall outlet is near the machine and freely ac-
R CAUTION:
• When you move the machine, unplug the power cord from the
• When the machine will not be used for a long time, unplug the
R CAUTION:
• When you pull out the plug from the socket, grip the plug to avoid
• Connect the copier to a power source meeting the specifications on the inside
front cover of this manual.
• Do not set anything on the power cord.
• Voltage must not fluctuate more than 10%.
• Make sure the copier is grounded.
76
the inside front cover of this manual.
er cord. Do not place heavy objects on it, pull it hard or bend
it more than necessary. These actions could cause an elec-
tric shock or fire.
Otherwise, an electric shock might occur.
cessible so that in event of an emergency it can be un-
plugged easily.
wall outlet to avoid fire or electric shock.
power cord.
damaging the cord and causing fire or electric shock.