Gateway 450RGH Service Manual page 23

Hide thumbs Also See for 450RGH:

Table of Contents

Replacing Gateway 450RGH Components

Hold the new module at a 30-degree angle and press it into the empty slot. This

module is keyed so it can only be inserted in one direction. If the module does not

fit, make sure that the notch in the module lines up with the tab in the module slot.

Move the antenna wires out of the way, then press the module down until it clicks

into place.

Reattach the black antenna cable to the connector labelled MAIN or M, then reattach

the light gray antenna cable to the connector labelled AUX or A.

Replace the mini PCI cover, then tighten the captive screw.

Replace the main battery and secondary battery (if installed). Connect the AC

adapter and modem and network cables, then turn on the notebook.

www.gateway.com

Table of Contents