Gateway 450RGH Service Manual page 58

13
Use a flat-blade screwdriver or chip puller to carefully unplug the LCD video cable
from the notebook. Make sure you grasp the connector, not the cable.
Caution
14
Loosen the screw securing the LCD panel video grounding wire, then lift the LCD
panel grounding wire to remove the screw.
The connector is fragile. When using a flat-blade
screwdriver to remove the connector, pry up one side
slightly, then pry up the other side slightly. Continue
alternating from side-to-side until the connector comes
loose.
LCD panel video grounding screw
www.gateway.com
Replacing the LCD panel assembly
53